Catégories

PLANET SINGLE PORT 10/100/1000MBPS ULTRA POE SPLITTER Agrandir l'image

PLANET SINGLE PORT 10/100/1000MBPS ULTRA POE SPLITTER

POE171S

Nouveau produit

1 Article

Attention : dernières pièces disponibles !

100,97 € (TVA incl.)

En savoir plus

Quick and Easy Gigabit High Power PoE Network Deployment

PLANET POE-171S Gigabit ultra Power over Ethernet splitter delivers the Ethernet digital data with DC 56V power over the twisted pair cables as an IEEE 802.3at/af Gigabit high Power over Ethernet splitter, and it separates the digital data and the power into three optional outputs (12V / 19V /24V DC) and distance up to 100 meters. If the POE-171S co-works with PLANET POE-171 (60-watt IEEE 802.3at PoE injector), it can offer more PoE applications, such as:

 

 

  • PoE PTZ Speed DomeOther Network devices that need higher PoE power to work normally
  • Thin-client
  • AIO(All-in-One) touch PC
  • Remote digital signage display  

 

 

The POE-171S frees the device deployment from restrictions due to power outlet locations, which eliminates the costs for additional AC wiring and reduces the installation time.

 

50 watts of Power over 4-Pair UTPThe POE-171S and POE-171 ultra PoE solution use cabling standard as IEEE 802.3at/af PoE. Instead of delivering power over 2-pair twisted UTP – be it End-span (Pin 1,2,3 and 6) or Mid-span (Pin 4,5,7 and 8), it provides the capability to source up to 50 watts of power by using all the four pairs of standard Cat5e/6 Ethernet cabling. In the new 4-pair system, two PSE controllers will be used to power both the data pairs and the spare pairs. Cost-effective and Easy Cabling InstallationIn the IEEE 802.3at Gigabit high Power over Ethernet devices installed, the system administrator only has to connect one single RJ-45 Ethernet cable to carry both power and data from an IEEE 802.3at/af PoE injector to POE-171S, and then the POE-171S splits data and DC power to any of IP networking devices. Besides, to connect through IEEE 802.3at Power over Ethernet injector and POE-171S, you can also have the benefits of cost saving, easy networking planning and higher reliability. Upon the completion of the installation of IEEE 802.3at compliant devices, the POE-171S, when functioning with the POE-171, can make the connection while migrating or splitting the power and the Ethernet digital packets, such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen Voice over IP (VoIP) telephones, multi-channel wireless LAN access points and other Network devices that need 50-watt high power to work normally.

 

 

Ultra PoE Splitter and Injector Installation:

For a place which is hard to find the power inlet, the POE-171S and PLANET Ultra PoE Injector - POE-171 or POE-173, operate as a pair to provide the easiest way to power your Ethernet devices which need high power input. The POE-171S separates digital data and power into three optional outputs (12V/19V/24V DC) to non-PoE devices such as laptops, PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed Dome, color touch-screen Voice over IP (VoIP) telephones, multi-channel wireless LAN access points and other network devices at distance up to 100 meters.

 

 

 

 

Interface

   

  • 2-Port RJ-45 interfaces- 1-Port Data + Power input- 1-Port Data output
  • 1-Port DC output power socket
  • 1 DC 12V/19V/24V DIP switch

Power over Ethernet

   

  • Ultra Power over Ethernet End-Span / Mid-Span PSE
  • IEEE 802.3at/af PoE standard compliant
  • Compatible with All IEEE 802.3at/af Powered Devices
  • Supports 56VDC, 50pwatt PoE power output
  • Splits the 56V DC power over RJ-45 Ethernet cable into DC 12V/19V/24V output
  • Remote power feeding up to 100 meters

 

 

Hardware

  

  • Metal case
  • All-in-one compact size design
  • LED indicators for Power LED and POE input
  • Three-mode DC output DIP switch for 12V/19V/24V

 

 

Standard Compliance

   

  • IEEE 802.3 10Base-T
  • IEEE 802.3u 100Base-TX
  • IEEE 802.3ab 1000Base-T
  • IEEE 802.3at High Power over Ethernet
  • IEEE 802.3af Power over Ethernet
  • FCC Part 15 Class A, CE

 

Hardware Specification

  • Interface  Input Port-1 x RJ-45 STP-PoE (Data + Power) InOutput Port-1 x RJ-45 STP-Data OutDC Socket- DC OutDIP-Switch-12V DC/19V DC/24V DC output voltage
  • LED Indicator  System: Power x 1 (Green)
  • Network Cable  Ultra PoE (60W): 10/100/1000Base-T: 4-Pair UTP Cat. 5e, 6 up to 100m (328ft)802.3af / at PoE (15W / 30W): 10/100/1000Base-T: 2-Pair UTP Cat. 3, 5, 5e, 6 up to 100m (328ft)
  • Data Rate  10/100/1000Mbps
  • Dimensions (W x D x H)  95 x 70 x 26 mm
  • Weight  300g
  • Power Requirements  52 ~ 56V DC
  • Power Consumption  50 watts (maximum)
  • Operating Temperature  0 ~ 50 degrees C
  • Storage Temperature  -10 ~ 70 degrees C
  • Humidity  5 ~ 95% (Non-condensing)

 

Power over Ethernet

  • PoE Standard  IEEE 802.3at Power over Ethernet Plus
  • Power Output  DC 12V/19V/24V by DIP switch control
  • PoE Power Supply Type  End-Span + Mid-Span
  • Power Pin Assignment  Pair 1: 1/2(-), 3/6(+)
  • Pair 2: 4/5(+), 7/8(-)

 

Standards Conformance

  • Standards Compliance  IEEE 802.3 10Base-T EthernetIEEE 802.3u 100Base-TX Fast EthernetIEEE 802.3ab 1000Base-T Gigabit EthernetIEEE 802.3at High Power over EthernetIEEE 802.3af Power over Ethernet
  • Regulation Compliance  FCC Part 15 Class A, CE